18m Length Galvanized Brick Wall Mesh 10cm Width As An
Anti-cracking Reinforcement
Brick Wall Mesh for use primarily as an anti-cracking reinforcement
in the construction of brick and block masonry.We can produce the
Width from 7.5cm-20cm. It is available in a variety of widths to
suit most wall constructions and is supplied coiled for ease of
handling. Additional applications include strengthening cornices,
low walls and balconies over door and window openings.And we could
make the length by your need.
Hole Type: Diamond
Hole Size: 12*25mm
width: 7.5cm,10cm,15cm,20cm
Length: 10m-100m
| Hole Type | Hole size | width | Length |
| Diamond | 12*25mm | 7.5cm,10cm,15cm,20cm | 10-100m |
packing: by carton or pallet
How to Install Brickwork Reinforcement Mesh?
The coil mesh is laid in strips between brick or block courses
leaving approximately 25mm clearance from the faces of the work.
Where coil mesh joins are required, ensure they overlap by at least
75mm.
The reinforcement is then simply embedded in the mortar for the
next course.
In most instances, application every third course, for the full
length of the wall, will be sufficient.
To reinforce brickwork at an opening, e.g. window or door, mesh
should be installed to overlap part of the opening, and part of the
solid wall.
Thinking of the width of the opening, lay the mesh approximately a
quarter of the way across the opening. The mesh should lie the same
distance again, across the solid wall.
Above windows or doors, install Catnic mesh for 2-3 courses,
starting from the course above the lintel as shown below
