SS304 10cm Width Galvanized Anti - Cracking Brick Wall Mesh 480g
0.35MM Thickness
Brick wall mesh is non- welding expanded mesh .It's is made of ss304 or galvanized steel plate.This use primarily as an anti-cracking reinforcement in the construction
of brick and block masonry.Brick Wall Mesh is available in a
variety of widths to suit most wall constructions and is supplied
coiled for ease of handling. Additional applications include
strengthening cornices, low walls and balconies over door and
window openings.
Specification:
Hole Type: Diamond
Hole Size: 12*25mm like the photo
Width: 7.5cm,10cm, 15cm, 20cm
Length: 10m-100m
| Hole Size | Width | Length | weight |
| 12*25mm | 7.5cm-20cm | 10-100m | 480g/m2 |
How to Install Brick Wall Mesh:
The Brick Wall Mesh is laid in strips between brick or block
courses leaving approximately 25mm clearance from the faces of the
work. Where coil mesh joins are required, ensure they overlap by at
least 75mm.
The reinforcement is then simply embedded in the mortar for the
next course.
In most instances, application every third course, for the full
length of the wall, will be sufficient.
To reinforce brickwork at an opening, e.g. window or door, mesh
should be installed to overlap part of the opening, and part of the
solid wall.
Thinking of the width of the opening, lay the mesh approximately a
quarter of the way across the opening. The mesh should lie the same
distance again, across the solid wall.
Above windows or doors, install Catnic mesh for 2-3 courses,
starting from the course above the lintel .
